How do installations work?
The Quooker tap can be installed at your chosen location on your sink or countertop. The engineer will connect it to both the cold water supply and the Quooker tank's supply line for boiling water. After you purchase your Quooker tap from us at QualityTaps, there are two options of how it can be installed into your kitchen. The installation requirements we recommend prior to fitting your tap are outlined below.
Installation Requirements
To install a Quooker system, all that is required is space for the tank, a 13 amp power socket, access to a waste pipe and a cold water supply underneath the work surface. This is within 500mm of the intended installation location below the worktop.
The Quooker tank must be fitted in an upright position. If your tap has to be fitted underneath the sink you might want to add a Quooker mounting bracket to hold the tank in place.
How to install your Quooker
-
Self service installations
Once your installation requirements are adhered too, we would suggest you call a qualified plumber in your local area to fit your new Quooker tap into your kitchen.
-
Quooker Engineer Installations
Alternatively, you can schedule an appointment to get a Quooker engineer to fit your Quooker tap into your kitchen. This will take approximately 14-21 days and there will be at a cost which may vary.
-
Quooker Taps Warranty
Be assured that after you have purchased your Quooker tap system. You will have 2 years of manufacturers warranty. This warranty covers your parts only.
Quooker Tap Guides
Quooker Tap Installation Guides
Quooker tap self service installation guide
Here is your Quooker tap self service installation guide with all you need to know before adding the tap in your kitchen.
Pro 3 Tank installation
Installing the Quooker requires connections to the mains water supply and the electrical system. The Quooker is supplied with a handy connection kit (including the required Quooker inlet valve) To install the Quooker PRO3 water tank it simply requires 400mm of height space and is 150mm in diameter. Read the full Quooker Pro 3 tank installation guide by clicking the link above.
Pro 7 tank installations
The Pro 7 tank holds 7 litres of water. The PRO7E tank requires 520mm of height space and are 200mm in diameter. Read more here to learn how to install the QuookerPro7 tank.
Quooker Combi tank installation guide
The Quooker COMBI tank supplies hot water by mixing boiling water from the Quooker tank with cold water from the water. mains inside the mixing valve. In addition to boiling water, the Quooker COMBI also supplies instant hot water. Installing the Quooker system requires connections to the mains water supply and the electrical system. The Quooker system is supplied with a handy connection kit for simple installation. You must not connect the Quooker system to a reverse osmosis system or to a water softener that reduces the pH value. Read more here about how to install the Quooker Combi tank
Quooker Cube installation guide
To install a Quooker cube tank, it needs to be possible to connect to the water mains. You will need a 13 amp power socket. The Cube is supplied with a connection set, this is including the Co2 pressure reducing valve and the Co2 cylinder. Please read the Quooker Cube Installation guide before installing the Quooker Cube tank